<rt id="ekqmq"><small id="ekqmq"></small></rt>
<acronym id="ekqmq"><small id="ekqmq"></small></acronym>
<acronym id="ekqmq"><center id="ekqmq"></center></acronym><acronym id="ekqmq"><small id="ekqmq"></small></acronym>
<rt id="ekqmq"><center id="ekqmq"></center></rt>
<acronym id="ekqmq"><center id="ekqmq"></center></acronym>
微橋科技產品新聞動態管理發布系統 現在是
首頁 ·公司動態 ·產品動態 ·原廠動態 ·行業動態 ·技術資料 ·LED驅動 ·DC-DC ·AC-DC ·MOSFET ·音頻功放 ·電池管理 ·霍爾及馬達驅動 ·其他 ·聯系我們

當前位置:首頁>>電池管理>> EMC5755-1.2A線性鋰電池充電管理IC   雙擊自動滾屏
發布者:微橋 發布時間:2010/9/3 閱讀:15886次    關鍵字: EMC5755

EMC5755-Standalone 1.2A Linear Li-Ion Battery Charger with Thermal Regulation in TDFN-6 DataSheet

General Description
    The EMC5755 is a complete linear charger for single cell lithium-ion batteries. With small TDFN-6 package and few external components, EMC5755 is well suited for portable applications. In addition, the EMC5755 is specifically designed to work within USB power specifications. No external sense resistor and blocking diode are  required. Charging current can be programmed
externally with a single resistor. The built-in thermal regulation facilitates charging with maximum power without risk of overheating.
    The EMC5755 always preconditions the battery with 1/10 of the programmed charge current at the beginning of a charge cycle, until 40μs after it verifies that the battery can be fast-charged.           
    The EMC5755 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.
The EMC5755 consumes zero reverse current from the battery at standby, shutdown and sleep modes. This feature reduces the charge and discharge cycles on the battery, further prolonging the battery life. The EMC5755 can also be used as a LDO when battery is removed. Other features include shutdown mode, charge current monitor, under voltage lockout, automatic recharge and status indicator.
􀂄 Programmable charge current up to 1.2A
􀂄 No MOSFET, sense resistor or blocking diode required
􀂄 Complete linear charger in TDFN-6 for single cell Lithium-ion batteries
􀂄 Typical zero reverse current from battery
􀂄 Thermal regulation maximizes charge rate without risk of overheating
􀂄 Charges single cell Li-ion batteries directly fromUSB port
􀂄 Act as a LDO when battery is removed
􀂄 Preset 4.2V charge voltage with ±1% accuracy
􀂄 Automatic recharge
􀂄 Charge status indicator
􀂄 C/10 charge termination
􀂄 45μA shutdown supply current
􀂄 2.9V trickle charge threshold
􀂄 Soft-start limits inrush current
􀂄 RoHS compliant and Pb-free
􀂄 Wireless handsets
􀂄 Hand-held instruments
􀂄 Portable information appliances
􀂄 Bluetooth application
􀂄 Charging docks and cradles

本文共分 1

  • 上篇文章MA5802-58V Asynchronous Buck Converter
  • 下篇文章SPN6336-Dual N-Channel Enhancement Mode MOSFET

    版權所有 Copyright Micro Bridge Technology Co.,Ltd. All rights reserved.粵ICP備05065909號